Omni Headquarters
163 Railroad Drive
Ivyland, PA 18974
Phone: (215)953 1166
        or (800)220 1075
Fax: (215)953 8644
Email:

Used Equipment



Empire Blast Room - PEB-1010-10 (Demo Unit)

This Empire Blast Room was used as a demo unit and is in excellent working condition. It is a bolt together design so no welding is needed to install. Only needs electric and compressed air and it is ready to go. Contains the equipment listed below. Please contact Omni Finishing for more information.

Item A - Empire Model #PEB1010-10 Blast Booth System and Includes:

  • Heavy Duty #14 Gauge Steel Panel Construction
  • Bolt Together Design, No Welding Required
  • Interior Room Dimensions - 9'-8" Wide x 10'-6" Long x 10'-0" High
  • One Set of Swing Type Work Entry Doors with Baffled Air Inlets Plenums - 9'-1" Wide x 9'-8" High
  • (4) Ceiling Mounted Flourescent Light Fixtures with Electronic Ballast and Clear Lexan Panels - 120 Volts
  • Rear Wall Exhaust Plenum, Easily Removeable for Filter Access
  • 6,000 CFM BVS Rear Wall Mounted Dust Collection System
  • BVS Reverse Pulse Cleaning System - Timer, Includes Magnehelic Gauge
  • BVS Air Connection Kit (Filter, Regulator, Ball Valve, Connection Pipe)
  • OSHA Required Door Interlock Safety Switches
  • NEMA-12 Main Electrical Control Panel, 460/60/3
  • Room Enclosure Is Supplied Unpainted-Some Surface rust present
  • Man Door with Window and interlock Switch
  • Complete Set Of Installation and Operating Instructions
  • Steel lay down floor sheeting---Used to protect concrete floor-good condition

Item B - 650 Pneumatic Blast And Recovery For PEB Enclosure

  • 6 1/2 Cu. Ft. Media Storage Hopper with Viewing Window
  • 900 CFM UNLINED Tunable Reclaimer
  • DCM-200hv Dust Collection System with Push-button Pnuematic Cleaning (200 sq. ft. filtration area, 99% efficient @ 1 micron)
  • 10 HP Blower Motor Assembly with Fan Damper (42" S.P.)
  • Exhaust Silencer
  • Thru the Wall Media Recovery Hopper, 30"w x 30"d x 12"h
  • 4" Media Recovery Hose
  • 1" Blast Hose Assembly x 25ft. Long
  • SCV-5 Nozzle, 5/16" Diameter Silicon Carbide
  • Saf-Stop Remote Control with 55' Dual Hose and Fittings

Electrical Requirements

  • 460-60/3 - 40 AMP Service (with PRS & BVS)

Air Requirements

  • 115 SCFM Blasting @ 80 PSI with one new 5/16" Nozzle
  • 10 SFCM @ 50 PSI For Dust Collection Cleaning System
  • 30 SCFM @ 30 PSI For Breathing Respirator & Cooling Tube

Used Wheelabrator Blast Room & Paint Booth - This Wheelabrator Blast Room & Paint Booth are in excellent condition.

The blast room is 35 ft long x 20 ft wide x 14 ft tall and features an in-floor media recovery system, dust collector and media separator. The paint booth is 35 ft long x 18 ft wide x 12 ft tall and features bi-fold doors, air handler and a gas cure system.

Please call for more information.

X

Omni Finishing, 163 Railroad Drive, Ivyland, Pennsylvania 18974 | phone: 800-220-1075 | fax: 215-953-8644
© 2000 - 2016 Blast Finishing, Inc.